TwinXs 3S Bộ điều khiển truy cập ra vào 2 cửa 4 đầu đọc, một thiết bị thông minh được trang bị các thông số kỹ thuật cao cấp.
TwinXs 3S của Spectra là bộ điều khiển truy cập cửa hỗ trợ hai cửa và bốn đầu đọc truy cập. Ngoài việc hỗ trợ tính năng chống trả lại toàn cầu, bộ điều khiển còn hỗ trợ một số tính năng dựa trên quy tắc. Bảng điều khiển truy cập cửa này có thể được cấu hình dễ dàng dưới dạng độc lập hoặc Master hoặc Slave. Bộ xử lý tốc độ cao của nó có thể tạo điều kiện thuận lợi cho các quyết định truy cập chỉ trong một phần nghìn giây.
Spectra’s TwinXs 3S is a door access controller that supports two doors and four access readers. In addition to giving support to global anti-pass back, the controller supports a number of rule-based features. This door access control panel can be easily configured either as a standalone or Master or Slave. Its high-speed processor can facilitate decisions of access in just milliseconds.
Bộ trung tâm 2 cửa TwinXs 3S với tủ và bộ nguồn
Features
Two Door / Four Reader Controller
TwinXs 3S supports 2 doors and 4 access readers where the controller can be configured as Standalone/Master/Slave. It supports a host of other rule-based features apart from global anti-pass back.
Fully Programmable I/O’s
This two door access controller has 8 optically-isolated digital inputs where 4 are general-purpose & fully-programmable, 2 dedicated for door sensor inputs, and 2 dedicated for egress switch inputs.
Compact Controller with Large Storage
Housed in a powder-coated MS cabinet, with rugged 5Amp power supply, TwinXs 3S is a very compact 2-door access control system with a high-speed 32-bit processor and large storage of 16GB. It has a capacity to store 250,000 cardholder database and buffer for last 500,000 events.
Data Communication and Protocols
TwinXs 3S supports communication interfaces viz 10/100 Mbps Ethernet, CAN and RS232/RS485. In addition, it also supports multiple protocols such as HTTP, SNMP, FTP, SSL & NTP. It also supports MODBUS protocol over ethernet for integration.
Field Upgradable Software with Local Programming
On-site update of device software without removing and sending it back to the service centre. This door access control system has an LCD display along with a 12-key keypad that allows users to program without attaching it to the host computer.
Configurable Reader Interface
The reader interface is configurable. This 2-door controller also supports legacy clock / data interface in addition to the more popular Weigand interface which is configurable from 24 to 255 bits. Plus, there’s a configurable buzzer type – continuous or beep.
Specification
Basic
- Operating Temp.-15 to 55°C
- HumidityRH 5 to 95% non-condensing
- Weight415 grams
- Dimensions (mm)H 161 x W 174 x D 32
- Supply Requirement12VDC / 1A switch mode supply
- PowerLess than 5 watt
Outside
- RTCNon volatile real time clock calendar, data retention for 10 years without external power
- Display16 char x 2 line high contrast backlight LCD
- AudioInbuilt buzzer
- EnclosureABS housing with sleek aesthetics
- Keypad12 keys membrane keypad
Inside
- CPU32 bit microcontroller running at 200 MHz
- Memory8GB data flash, 2MB RAM
- WatchdogInbuilt watchdog supervisor
Capabilities
- Database250,000 user database
- Transactions500,000 time stamped events storage capacity
- Serial PortOne Selectable RS232/RS485 port
- CANOne CAN BUS interface port
- ProtocolsSupports TCP/IP IPv4 & IPv6, SNMP, HTTP, FTP, NTP, SSL
Interface
- Ethernet10/100 Base-T RJ45 ethernet interface
- Reader InterfaceWeigand configurable from 26 bits to 255 bits / clock Data
- Reader Ports4 reader input, each with reader tamper input, 2 LED control and buzzer control output
- Digital Inputs12 optically isolated general purpose input (GPI)
- Digital Outputs6 general purpose output (GPO), potential free changeover relay, contact rating 3A/30VDC
